Extensive self-check: review of all relevant hardware and software elements, including display of the current software version
Perfectly readable display in all lighting conditions
Vibration at initial signal detection, allowing rescuers to focus on the visual surface search during signal search
Perfect mark performance due to precise signal processing without performance loss
PIEPS interference protection: minimizes the impact of external interference
Protection in send mode with auto-antenna-switch: if the transmitting antenna is affected by interference, the secondary antenna takes over
Protection in search mode with signal verification: only verified 457 kHz signals are displayed
iPROBE support: the PIEPS PRO BT can be temporarily deactivated using the smart iPROBE, allowing the receiver to automatically focus on the next strongest signal
Backup mode: device remains in send mode, but transmission is temporarily suppressed to avoid interference during search
Auto search-to-send: automatically switches from search mode to send mode if the device remains motionless for a set period (e.g., in case of burial)
Group check: reviews activity and transmission parameters of partner devices; recommended before each tour
Scan function: provides an overview of all buried devices within detectable range
Victim selection: scans the entire receiving range and displays the three closest victims
Analog mode: supports specialized search strategies and training scenarios
TX600 support: compatible with the PIEPS TX600 mini-transmitter for dogs and equipment, operating outside standard EN300718
Inclinometer: integrated three-dimensional inclinometer measures slope angle
Carrying system (PIEPS PRO BT):
High wearing comfort with low weight
Neoprene pouch with soft shoulder strap
Quick-pull system for fast device access
Maximum range: 60 m
Search strip width: 60 m
Dimensions (mm, L × W × H): 118 × 76 × 29
Weight (including batteries): 230 g
Power supply: 3 × AAA batteries
Battery life: minimum 600 hours
Receiving frequency: 457 kHz
Transmission frequency (according to EN300718): 457 kHz
Operating temperature range: -20°C to +45°C
